The AT42K NG-TRX radio actuator mimics the status of 4 outputs of a connected control unit. Using the NG-TRX radio technology, it is able to activate and control home automation devices such as lights, shutters or irrigation sprinklers that have been associated to a compatible EL.MO. intrusion detection control unit. AT42K is equipped with one 16 A power relay and three 6 A power relays.
Versatility is AT42K’s strength: its outputs can be controlled from the keyboard, from the e-Connect app or by giving voice commands to Google or Amazon’s smart speakers.
AT42K can be configured using the BrowserOne software. AT42K’s board uses LEDs to signal the status of its outputs, the power source availability and whether the configuration phase is underway. A tamper terminal makes it possible to connect tamper buttons that signal the opening of the box or its removal from the mounting surface. AT42K is provided in a small waterproof IP65 box and is compatible with devices that use the NG-TRX protocol, such as VIDOMO2K, VICOMPACT2K and GATEWAY2K.
Type |
NG-TRX wireless actuator |
Relay outputs |
1 × 16 A relay output and 3 × 6 A relay outputs |
Max power |
3000 W for 16 A relay, 1000 W for 6 A relay |
Radio connection range |
Max 2 Km in open field |
Setup |
Via BrowserOne |
Compatibility |
VIDOMO2K and VICOMPACT2K control units and GATEWAY2K module |
LEDs |
1 learning LED indicator, 1 device status LED and 4 outputs status LEDs |
Transmission frequencies |
868,120 MHz, 868,820 MHz, 869,525 MHz |
IP class |
IP65 |
Operative conditions |
−10° C ÷ +55° C, humidity 95% |
Dimensions and weight |
W 167 x H 121 x D 80 mm, 130 g |
Power consumption |
80 mA (idle mode) |
Power supply |
AC230V |
Compliance |
Compliance with EN50131 grade 1 |