MDSPLIT
MDSPLIT is a split module for TA2000 and TA4000 control panels (with FYRA loop modules) that allows to connect the two branches of an FYRA loop to the same control panel board.
The total number of devices supported by the two branches is 254. MDSPLIT is equipped with 3 isolator circuits that activate in case of cable short circuit in order to let the remaining loop section working properly. It also features 6 front LEDs indicating the loop section where a fault has occurred.
MDSPLIT certification: CPR 305/2011 EN54-17.
Tags
-
Type
Module allows to connect 2 separate FYRA loop branches to the same loop board TA2000 e TA4000 control units
Integrated isolator
Yes
Response voltage
Vso = 4 VDC ± 5%
Restore voltage
Vsc = 5.3 VDC ± 5%
Signalling
LED for loop’s fault
Dimensions and weight
L 129 x H 80 x p 20 mm, 94g
Operating conditions
-10°C / +55°C
Power consumption
800 μA in idle state (Loop1 and Loop2 closed), 5 mA maximum (Loop 1 or Loop 2 shorted)
Power supply
DC24V from loop
Certification
Certification CPR 305/2011 EN54-17
-
Datasheet
-
Foglio tecnico
Model15/07/2020 -
Datasheet
Model15/07/2020
Product Description
-
Descrizioni Capitolato
Model15/07/2020
-
Product Description
Model15/07/2020
Technical Manual
-
Manuale Tecnico
Model06/10/2020
-
Technical Manual
Model06/10/2020
CE - DoP
-
CE - DoP
Model25/11/2020
-
CE - DoP
Model25/11/2020
Notified Body
-
Ente Notificato
Model25/11/2020
-
Notified Body
Model25/11/2020
-
-
Technical Manual
-
Manuale Tecnico
Model19/06/2017
-
Technical Manual
Model19/06/2017
-
-
-
MIIE0MS00300Modulo incendio analogico connessione 2 loop ad 1 scheda loop con isolatore FYRA
-
MIIE0MS00200Modulo incendio analogico IE2 connessione 2 loop ad 1 scheda loop con isolatore
-
