Type | Accessory device of the NG-TRX system. It allows to receive and transmit signals and commands to and from all the compatible radio devices. |
Compatible control units | VIDOMO2K and PREGIO series (with A2 hardware) control units |
Max number of GATEWAY2K in the system |
|
Setting | Dipswitch for configuration of the address and other programmable functions |
LED | LED for visualization of the RS485 serial line operation, radio signal strength and for the state of the housing tamper protection |
TX frequency |
|
Wireless range | Maximum 1600 m in open field, except for the limitations due to operating conditions. |
Sound signalling | Single beep of the internal buzzer upon reception of a compatible radio packet during Monitor RF session |
Wirings | Terminals for serial line and power supply connection. Maximum cable length to the control unit: 1 Km |
IP class | IP3X |
Operating temperature | -10 / +55 °C, environmental class II, 93% Ur. |
Dimensions and weight | W 130 x H 34 x D 46 mm, 71 g |
Power supply | DC12V from serial line RS485 |
Power consumption at DC12V | 41 mA during RX (stand-by), 67 mA during TX |
Compliance | Compliant with EN50131-3 degree 2, environmental Class II |
Type |
· Accessory device of the NG-TRX system. It allows to receive and transmit signals and commands to and from all the compatible radio devices. |
3759.46 KB