Inputs
|
- 32 total on board wireless inputs
- Of the 32 available wireless inputs can be used, reducing the wireless inputs, 2 wired inputs on board control unit
- On board zones can be configured as: NO, NC, double or triple balanced, fast or output status. Zones can be assigned different properties
|
Outputs
|
- Alarm relay output with C-NO-NC free from potential contacts with 3A@AC24V carrying capacity. The output can be configured
- 12V fuse-protected power output for detectors
- Connector with 2 outputs for ETRREL4 modules that can be configured and remotely controlled
|
Users
|
- Advanced management of 32 users max; users can be assigned a proximity key or a remote control device
|
Areas/sectors
|
- Management of 4 areas with 4 sectors each
|
Control comands
|
|
User interface
|
- Graphic B/W LCD display 128x65 with RGB backlight depending on operating conditions (adjustable)
- Backlit 20-rubber-key keypad
- Unit controlled via proximity key with partialization function.
- Low-consumption proximity key reader located at the centre of the sectors keypad (selectable)
- RF Monitor with graphic display
|
Serial line
|
|
Clock
|
- Internal clock with backup battery
- Weekly timer
|
Wireless module
|
- FM 434 525 MHz receiver in accordance with EN300220 (Class 2) and low consumption EN50131 with built-in antenna on PCB
- Low-consumption AM 868.300 MHz transmitter compliant with EN300220 and EN50131 standards with antenna integrated on the PCB. Control up to 15 wireless sirens and 15 configurable actuators
|
Events storage
|
- Historical memory with 1000 events capacity
|
Connectors
|
- MINIUSB pc connector for configuration and remote control, and firmware upgrade (simplified mode)
- Connector for remote I66 proximity key readers
- Power connector from the MDPOWER internal supervised power supply module
|
Phone dialer
|
- Telephone number list, 16 numbers for voice calls, 2 numbers for digital calls, 4 numbers for remote assistance, 1 number for direct dial-out
- Digital dialler operating with ContactID and Fast Format protocols
|
Voice synthesis
|
- Voice synthesis module with 64 messages recordable by the installer, equipped with microphone and loudspeaker; it can be configured via USB and serial line for a total of 8 minutes recording time
- Messages can be recorded by using the suitable software module; they can also be recorded using a microphone connected to the PC audio board
|
GSM
|
- GSM/GPRS module included for the connection from and to control unit via GSM, also allow the connection to e-Connect system.
- Remote interrogation via SMS with GSM module
- Sophisticated credit control system for rechargeable SIM cards
- Remote listening device controlled via SMS
|
LAN
|
- MDLAN Ethernet module (optional) for remote control and programming via TCP / IP
|
Internal siren
|
- Low-consumption built-in piezo siren for alarms and operating signals, volume adjustable
|
Functions
|
- Temperature sensor with thermostat function, programmable hysteresis and calibration option
- MDTEMP radio temperature detector (optional) to be used instead of the built-in detector or as external detector if necessary
- Daily/weekly thermostat function, with block boiler detection
- Emergency light function
|
Housing
|
- Plastic against opening and removal
- White colour
|
Battery
|
|
Operating temperature
|
- from +5 to +40 °C (environmental class I)
|
Dimensions/weight
|
- W 268 x H 210 x D 63 mm
- 990g with well fixing bracket
|
Consumption
|
- 26,5mA (NO inputs) with disconnected control unit (low consumption)
- 125,5mA with disconnected control unit and GSM module in TX voice
|
Power supply
|
- 12V (9V ¸15V) from external power supply or MDPOWER module
|
Performance level
|
|
Standards
|
- User interface according to EN50131 with compliance options
- Compliance EN50131-3 grade 1, environmental class I°
- Compliance to R&TTE 1999/5/CE Standard and to ETSI EN 300220-3 and ETSI EN301-5-3+A1
|